4002 - Lug Nut Remover - 15/16" - 17mm - 21.5mm

• Features patented reverse tapered thread to remove stripped lug nuts or lug nuts with missing keys
• Fits lug nuts measuring 15/16" "point-to-point"
• Heavy duty threads make these sockets reusable
• Use with 1/2" drive impact wrench
• Fits: 17mm, 19mm & 21mm Lugs
• Also available in CTA #4001 5 Pc. Emergency Lug Nut Remover set

• DO NOT USE on lug nuts/bolts with spinning cap/ring

Instructions

NOTE: Maximum recommended air pressure is 90 psi

1. Install 15/16" socket on impact wrench and switch wrench valve to the "unscrew" position.
2. Hold wrench/socket square to lug nut, then turn socket counter-clockwise by hand until it "bites" the lug nut.
3. Operate the impact wrench until the socket is driven on and the lug nut is removed.
4. To remove a lug nut that is stuck inside the socket, grind flats on opposite sides of the exposed portion of the nut, then clamp them securely in a vise. Reverse the direction of the impact wrench and operate until the nut is extracted.

Attention: It is NOT recommended to use Emergency Lug Nut Socket Removers on wheels with deep and narrow lug wells/holes

Video